Infrared sensor tap for sink, for cold or pre-mixed water, battery operated
- Infrared sensor electronics, programmable
- 6V solenoid valve with pre-filter
- Flow regulator
- Flexible Connecting Pipe Clean-Fix S, G 3/8 IG x 380 mm, with pre-filter
- 6V battery compartment, IP65 protection class
- 4 x AA alkaline batteries 1.5 V
- Fixing material for mounting on the sink
- Weight: 2.02 kg/pc
SCOPE / TECHNICAL DATA:
- Setting options via SWS SSC
- Sensor range (short/medium/long)
- Programming via short-range reflex (off/on)
- max. flow time (1-360 s)
- Monitoring time (0.6–60 s)
- Stagnation flush (off/5-600 s, every 1-240 h after last flush/every 1-240 h)
- Continuous flushing for thermal disinfection, with burn protection (off/15-600 s)
- Flow duration (off/15-600 s)
- Energy saving mode (off/1-254 h after last rinse)
- Stop cleaning (off/60-360 s)
- Setting options via short-range reflex
- Sensor range (short/medium/long)
- Stagnation rinse (off/30 s, every 24 h after last rinse/every 24 h)
- Continuous rinsing for thermal disinfection, with anti-scald protection (off/300 s/120 s)
- Stop cleaning (off/60 s)
- Flow: max. 5 l/min independent of pressure
- Flow pressure: 1.0 - 5.0 bar
- max. Standstill pressure: 8 bar
- max. operating temperature: 70 °C (80 °C for thermal disinfection)
- Material: brass housing, in compliance with German drinking water regulations
- Surface: Chrome
- Connection: G 3/8 IG
- Certificates:P-IX 19116/IZ, WRAS registered
- Noise class: I
- Flow class: Z
No products in the basket.